INCUDRIVE D-I
Drive-unit for bottles with incubating hood
________________________________________________________________________________________________________________

l for rotating and rolling of test tubes and bottles
l with air-circulation system

Designed for defined slow rotation in lower range of speed or fast rotation for thorough mixing of samples.

The rotational speed of cell culture bottle with Ø 120 mm is approx. 0.1 to 4 rpm, continuously adjustable.

For bottles and vessels with an outer diameter of 60-400 mm and maximum length of the vessels 520 mm (incl. screw cap).

The device has been designes for use at benchtop. Working temperature internal +5°C above room temperature up to +50°C.

The INCUDRIVE D-I provides space for up to 4 individually removable roller inserts. The vertical placement of the roller inserts is predetermined.
Alternatively, there may be wire mesh trays with mounting brackets instead of roller inserts to allow for placing various equipments in the same environmental/temperature conditions.

With stainless steel bearings, suitable for continuous mode with heavy load.

The toothed belt transmission from motor to drive axles reliably prevents from slippage or stopping of the bottles.

The door of the incubator is made of transparent, thermally insulated UV-resistant plastics for permanent monitoring of the experiment.
The temperature is regulated by an air-circulation system with integrated electronic temperature control.
Additionally, the actual and set temperature is constantly shown on the LED-display.

CO2 available on request.


INCUDRIVE D-I
and 4 roller inserts (optional)



________________________________________________________________________________________________________________
Technical Data

Dimensions inner (w x h x d):

560 x 740 x 550 mm

Dimensions outer (w x h x d):

610 x 920 x 780 mm
Working temperature internal: +5 °C max. +50 °C above room temperature
(with electr. controller)
Temperature stability inside the medium: < +/-1 °C

Power:

230 V, 50-60 Hz, 330 W or
115 V, 50-60 Hz, 330 W

Weight:

approx. 45 kg



________________________________________________________________________________________________________________
Ordering Information
Type
Cat.-No.

INCUDRIVE D-I
Drive unit roller incubator optionally to equip
with roller insert or roller DRUM

3.060 001
INCUDRIVE D-I CO2
Drive unit roller incubator optionally to equip
with roller insert or DRUM, using with CO2 (0-10 %)
3.066 001

Accessory to equip with roller inserts (max. 4 per device)

Insert
with 2 mounting brackets and 8 stainless steel ball bearing axles for
4 bottles with Ø 70-120 mm or
3 bottles with Ø 40-70 mm (max. 4 roller inserts per device) or
2 bottles with Ø 120-240 mm (max. 2 roller inserts per device) or
1 bottle with up to Ø 400 mm (max. 1 roller insert per device)
(Weight of rolling goods up to max. 10 kg per level and max. 25 kg per device. Maximum length of the vessels is 550 mm)
3.061 011
Accessory to equip with DRUMs
Adapter for roller frame for DRUMs
3.063 011
Roller frame for DRUMs
3.055 101
DRUM R
for 7 roller bottles Ø 120/125 mm
(max. 1 per device)
3.056 071
DRUM K10
for 210 tubes 100 x 16 mm
(max. 3 per device)
3.056 101
DRUM K16
for 210 tubes 160 x 16 mm
(max. 2 per device)
3.056 161
DRUM M
for other vessels (custom-made)
(max. 2 per device)
3.056 311